Begin Date: 2011-10-15 23:12
Expire Date: 2011-10-17 01:12
Availability Deadline: 2011-10-15 23:12
Maximum number of participants: 0

October 2011 Meeting at Hard Labor Creek State Park

October Meeting - Saturday 10/15/2011(Regular Meeting is from 9:30 am to noon)
and Sunday 10/16/2011

Forge Item: Leaves, Acorns, or Pumpkin.

Portable Forges and extra Anvils are welcome.

Address/Directions
Hard Labor Creek State Park
5 Hard Labor Creek Road
Rutledge , GA 30663


Located 2 miles north of Rutledge. Take I-20 exit #105 into Rutledge and proceed 3 miles on Fairplay Road. Click here for park information.

Camping Weekend - We have again worked out a deal where you call the park and you can rent just
one night, just call the park office (706-557-3001) and make a reservation there.
Make sure you mention Alex Bealer.

We will have forges for hammering and we are wrangling/arm-twisting for demo's - come on by and relax for an all day hammer-in!

Our Public hours would be from 10:00 to 7:00 or (30 minutes before dark) Saturday
and then 10:00 to 3:00 on Sunday.
That gives us breakdown and clean up time before to late Sunday.

Alex Bealer has a picnic shelter for our meeting at Hard Labor Creek State Park on Saturday the 15th and Sunday the 16th.
It is located pretty much in the middle of everything, across from the park office and on the same road as the campground. There is a large parking lot in the "general area", and the entrance to the campground is to the left.
The "Friends of the Park" chapter may be setting a miniature fall festival for that weekend as well, which may bring out more people.

If you want to bring things to sell. Please let me know so we can work out the details with the Park.

I asked if boat rentals still be available for the 15th and 16th.
They will be renting boats on Lake Brantley.
This lake is the one closest to the campground and cottage area.

Users availability for this event:

I'll be there: 6 Torch Mullins, jerre smith, cal, John Stine, jguy, Sean OShea
I don't know yet: 2 dan tull, frankprice
I won't be there: None

Registered members can set their availability for this event.

 
Adding comments has been disabled for this item
Page created in 0.071 seconds